|
Construction |
Heavy Rib Fibre Bonded Entrance Matting |
|
Yarn
Type |
100% Polypropylene |
|
Availability |
15 x
2mtr Rolls |
|
Backing
Material |
Gel
Back |
|
Backing
Material (Carpet) |
Fibre Bonded |
|
Finished Pile Weight
(+/-
0.5mm) BS 4223
|
1150 gms/m2 |
|
Total Weight (+/- 10%) BS 4223
|
2450 gms/m2 |
|
Static |
Below 200 volts, i.e. below the
level of human sensitivity. |
|
Light
Fastness |
BS 1006 1990 BO2 Better than
6
(Scale bad = 1 to good = 8) |
|
Shampoo Fastness |
BS 1006 UK-TB 1990 4-5 wool, 5 All other fibres. (5
represents no change) |
|
Wet &
Dry Rubbing Fastness |
BS
1006 x 12 1990 |
|
Flammability Test |
BS4790 Low Radius of Ignition |
|
Performance Rating |
Heavy Contract |
|
Installation
Sub
floors should be clean, dry and flat and prepared in accordance with B55325.
Timber floors
should be covered
with
plywood or other
appropriate sheet materials. Install tiles using full spread of F
Ball's F41
or Laybond
79 tackifier.
Before laying, material should
be allowed to
condition for a
minimum of 24
hours at the expected
temperature
prevailing when the building is in use.
Further
installation information is available from the Leigh Carpet Tiles Sales Team.
|
