|
Construction |
Velour
Fibre Bonded
Carpet Tile |
|
Yarn
Type |
100% Polypropylene
|
|
Availability |
50cm x 50cm (Tile) |
|
Backing
Material (Tiles) |
Oxidised Bitumen with Spun Bonded
secondary and Glass Reinforcement |
|
Backing
Material (Carpet) |
Fibre Bonded |
|
Total Weight (+/- 10%) BS 4223
|
3850 gms/m2
|
|
Static |
Below 200 volts, i.e. below the
level of human sensitivity. |
|
Castor
Chair Rating BS EN 985 |
Pass
(We recommend castor chair pads for intense use
locations) |
|
Rubbing Fastness |
BS
1006 x 12 1990 |
|
Flammability Test |
BS4790 Low Radius of Ignition |
|
Performance Rating |
Heavy Contract |
|
Installation
Sub
floors should be clean, dry and flat and prepared in accordance with B55325.
Timber floors
should be covered
with
plywood or other
appropriate sheet materials. Install tiles using full spread of F
Ball's F41
or Laybond
79 tackifier.
We recommend Atlas Velour Tiles to be fitted
tessellated (checker board). Before laying, material should
be allowed to
condition for a
minimum of 24
hours at the expected
temperature
prevailing when the building is in use.
Further
installation information is available from the Leigh Carpet Tiles Sales Team.
|
